Showing posts with label Revit MEP Resources. Show all posts
Showing posts with label Revit MEP Resources. Show all posts

Monday, January 26, 2009

Space Naming Utility for Revit MEP 2009

Release Date: 2009-01-21

The Space Naming Utility for Revit® MEP 2009 software is an intuitive tool that automatically assigns the names and numbers from architectural rooms to Revit MEP spaces. By downloading the Space Naming Utility for Revit MEP 2009 software, you can eliminate the need to manually assign names to the spaces, helping save time and simplifying your workflow.
Content is currently available in English only.

The Space naming Utility for Revit MEP 2009 is available to subscription customers.

Download (32-bit)
English (msi - 835Kb)

Download (64-bit)
English (msi - 835Kb)

Monday, December 8, 2008

Revit MEP Web Update 3

Web Update #3 Service Pack – November 2008


Important Note:
Web Update #3 is not a full install; rather it is using Service Pack technology similar to AutoCAD® based products. Prior to installing the Web Update #3 Service pack, please verify that you have already installed the First Customer Ship build or Web Update #1 build of Revit MEP 2009. The Web Update #1 full install is available below.

Before You Download
Please read before downloading and installing:
Service Pack Readme (pdf).

Get Started
Read all instructions above, then click one of the following links to download.

Revit MEP 2009 Web Update #3 Service Pack (32-bit)
(exe – 431 MB)

Revit MEP 2009 Web Update #3 Service Pack (64-bit)(exe - 54 MB)

Notes:

  • The service pack contains changes from all previous service packs.
  • The service pack can be applied to both the standalone and suite versions of Revit MEP 2009.

Monday, July 14, 2008

MEP Analysis Extension for AutoCAD MEP/Revit MEP Now Available

From labs.blogs.com

To support our vision for Building Information Modeling and strengthen our portfolio of sustainable design solutions, Autodesk has packaged 25 useful utilities for energy efficiency in a "green" MEP Analysis Extension. I was thrilled to post the extension for download free of charge on the Autodesk Labs site. The MEP Analysis Extension helps engineers reduce costs as well as energy and environmental impact while improving the performance of building systems. The MEP Analysis Extension operates with AutoCAD MEP 2009 and Revit MEP 2009.

http://labs.autodesk.com/utilities/mep_analysis_extension/

The MEP Analysis Extension calculates cooling and heating loads for commercial and residential buildings, U-Values, and psychrometric properties of air. Running these types of ventilation calculations through the MEP Analysis Extension saves time and improves accuracy, potentially saving thousands of dollars and kilowatts of electricity. The MEP Analysis Extension also contains utilities for sizing duct work, piping, and HVAC systems - helping engineers and architects identify the most appropriate building equipment early in the design cycle.

The MEP Analysis Extension is chock full of useful utilities:

Calculations
Single-state psychrometric calculations
Mixed-air psychrometric calculations
Duct sizing calculations
ASHRAE duct fitting pressure loss calculations
Rule-of-thumb commercial HVAC load calculations
Simple residential/light commercial HVAC load calculations
Swimming pool heating calculations
U-value calculations

Sizing
General pipe sizing
Hot/chilled water pipe sizing
Steam pipe sizing
Low pressure gas pipe sizing
High pressure gas pipe sizing
Refrigerant pipe sizing

Analysis
Fan cost analysis
Fan curve analysis
Pump curve analysis

Utilities
Wire sizing utility
Glass moisture condensation
Metric-English converter
gbXML parser

So if you are an AutoCAD MEP or Revit MEP user, check out this extension and let us know what you think: labs.mep.analysis@autodesk.com . When you do, please mention if you are an AutoCAD MEP or Revit MEP user. I am curious to see which group is more talkative. :-) If you like these tools, please let us know. If you do not, also please let us know. Your feedback shapes the future of our technologies. The extension will run through October 31, 2008. Happy Halloween.

Adding more and more to our arsenal of free utilities to garner your feedback is alive in the lab.

Friday, April 25, 2008

Revit MEP Resource Center

Craig Parton of Mid-West CAD let me know just found a new Revit MEP Resource Center site from Autodesk. I have not had much time to explore it, but I thought I would put it out there for others to see.

Is anyone using Deep Space for analytics? https://www.deepspacesync.com/