8 awesome paid iPhone apps on sale for free for a limited time (Repost)

https://www.yahoo.com/tech/s/8-awesome-paid-iphone-apps-sale-free-limited-140453066.html?soc_src=mags&soc_trk=copy

Revit OpEd: View Reference Example

Revit OpEd: View Reference Example: Related to a past POST or TWO ...or THREE . Here's a quick example of a poorly crafted Plan View reference that can be used to indic...

Report The 360 View: Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks

Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks

Optimizing Parallels Settings for Autodesk BIM 360 Glue / Autodesk Navisworks

I switched to an Apple Macbook Pro three years back and has been using it ever since at work and home. Running BIM 360 Glue or Navisworks in a Windows virtual machine using Parallels has become such a breeze that I barely have to pause. It took me a while to understand the settings initially and some additional trial and error to identify what i believe to be the key parameters. I thought of sharing in this post some of these lessons learned in optimizing Parallels settings for use with BIM 360 Glue or Navisworks.

Autodesk BIM 360 Glue on a Macbook Pro running Parallels 10 and Windows 8.1

The above screenshot shows the Clash Resolution workflow of Glue in action. I have a 2013 Macbook Pro with Parallels 10 and Windows 8.1. The below Settings are specifically for Parallels 10, and you might notice minor changes in other versions. Irrespective of the version of Windows and Parallels you use, this should give a good starting point for you to set up your work machine.

Take a back up: Before you start modifying any settings, it is recommended to take a back up copy of your virtual machine. You will find a *.pvm file within your parallels folder. Make a copy of this and save it some where safely such that you can easily roll back to your existing virtual machine state.

Configure for Design: In the newer versions, Parallels has introduced an out of the box option to specify your intent for the virtual machine. This option is available while you configure the virtual machine or you can change it later from the General Settings. It is recommended to select "Design" from the options for best results while using any CAD software.

 

In addition to this, let us take a look at some of the other settings that are very important. All these setting are accessible by selecting the "Settings" of the virtual machine. There are four main tabs General, Options, Hardware and Security. We are going to focus on some key parameters within the Options and Hardware Tabs.

Virtual Machine Performance Options: Parallels provides options to tune for performance and power usage.   I would recommend selecting "Faster Virtual Machine" and "Better Performance" for best results. Rest of the Settings within Options didn't seem to make too much impact, so I kept the default configurations.

Hardware: I have found couple of settings within the Hardware tab to be the key for good graphics, especially when you are navigating 3D models. First is the CPU & Memory numbers. I have 16 GB of RAM on my machine and I have noticed the best performance when I dedicate 9-11GB for the virtual machine to go with 2 CPUs. There are some benchmark tests available on the web that point to this setting.

Next is the Video memory, and dedicating ~1GB of Video memory and using DirectX10 has worked quite well for me. What is more important is the Resolution. It is recommended to uncheck the 'Enable Retina resolution' box. On Windows 7, instead of this checkbox you will be presented with three options - Scaled, Best for Retina, More Space. I have found the 'Scaled' option to work very well.

I think you are all set to take your newly tuned Windows virtual machine for a spin. Let us start in a Window mode or Full Screen mode (I never really liked the Coherence mode of Parallels). You can try what you like from the View options.

Couple of final tweaks to the Windows settings and you are all set. I typically run Windows in a 1440X900 Screen Resolution. And from the PC System Properties, I set Windows to 'Adjust for Best Performance'. 

Restart Windows if necessary and you are ready to Glue it! 

- See more at: http://the360view.typepad.com/blog/2015/02/optimizing-parallels-settings-for-autodesk-bim-360-glue-autodesk-navisworks.html#sthash.B21lVsVv.dpuf

CAD Shack: Top 20 Revit Tips, Tricks, and Handy Tools

CAD Shack: Top 20 Revit Tips, Tricks, and Handy Tools: Here are some of my favorite Revit Tips and Tricks. 1)   Previous Selection Set Ctrl + the left arrow key on your keyboard will re-sele...

Revit OpEd: IF Formulas and Notepad

Revit OpEd: IF Formulas and Notepad: A good tip was shared (by Josephpeel) at RFO the other day. If you use a Tab or Line Break in Notepad to make it easier to understand a len...

Revit OpEd: Saving Backward

Revit OpEd: Saving Backward: It is a common question and the answer is no, Revit does not save backward, to an older version.  People often regard saving a file from on...

Autodesk Revit Model Review - Migrating 2014 check files to 2015

If you are a Autodesk Revit Model Review user and you try to migrate a 2014 check file to 2015, you will get the following error:

I have not found any workarounds other than creating the rules again for 2015 from scratch.

Revit OpEd: Import CAD - Orient to View

Revit OpEd: Import CAD - Orient to View: This is what the Autodesk Help documentation says about this feature at the moment. Orient to View - This option is useful if True North a...

3D Room Names with Dynamo

I have been working with a couple of clients that have requested that Room / Space names are visible in 360 Glue and Navisworks. The primary reason being easy identification of rooms and spaces. This will ultimately be expanded to zones as well.

The way that I have accomplished this (with the assistance of Daniel Hurtubise of Revitit!) is to use Dynamo to create 3D Text for the Room Names.

3D Room Text in Revit

3D Room Text in Glue

First a disclaimer. By no means am I a Dynamo expert, not even sure I meet the standard to be a Dynamo novice. There are some really good blogs and instruction material on Dynamo and having a really smart friend like Daniel is a huge help as well.

The process to create the 3D Room Names is fairly straightforward. First you need to have Dynamo installed on your workstation. Second download the support files which consists of a Revit family and the Dynamo code.

The Revit family needs to be loaded into your project file that you want to generate the 3D Room Text. Open Dynamo and open the 3D Room Name.dyn file. Before running the code against the model, make sure that you add the LunchBox for Dynamo package into the project. This needs to be added in order for the code to run.

You can then run the code to generate the 3D Room Text.

Revit OpEd: Copy Monitor - What Elements are in a Relationship...

Revit OpEd: Copy Monitor - What Elements are in a Relationship...: A friend recently asked if there is an easy way to find out what elements are currently involved in a Copy/Monitor relationship. Good quest...

Revit OpEd: Starting View

Revit OpEd: Starting View: I was reviewing old posts for something I thought I wrote about Starting Views. I was befuddled when I didn't find anything. I guess tha...