AU Unplugged - Vote by Nov 5th

AU Unplugged

Welcome to AU’s “unconference” space, where session content is created and driven by participants. AU provides the venue and you provide the topics. AU Unplugged will help move some of the great hallway conversation that folks at AU have into a low-key classroom setting so attendees with similar interests can join in.

Vote for Your Favorite Topics—Voting Ends November 5

What a lineup! Cast your vote for as many of the 50 excellent topics—submitted by AU 2008 registrants and speakers, and Autodesk employees—as you'd like. We will publish the "winning" sessions here and offer them in AU Unplugged.

Guidelines for a Successful AU Unplugged Session

• Discussions only! No lectures.
• No product or service promotion or selling!
• The Law of Two Feet applies—if you’re not learning or contributing, leave.
• The perfect participants—the right people are the ones who show up.

Revit Structure Extensions Update

From BIM and Beam

The fall vintage of the Revit Extensions is now available

This is time again for our new set of Extensions. We have 5 new pretty cool free of charge Extensions for our dear customers on subscription:

Static Analysis of 2D frames
Static Analysis of continuous beams
Retaining wall reinforcement
Slab corner reinforcement
Automatic reinforcement for multiple elements together
These Extensions plus all of the others are available in English, French, Italian, Polish, German and Chinese and you can learn more about them at http://www.extensions4revit.com/

In order to download these Extensions please go to our subscription portal at http://subscription.autodesk.com/

The Static analysis of 2D frames and continuous beams Extensions are in the spirit of the slab analysis and the truss analysis. We like to call them simulation analysis. They allow our users to do quick analysis inside Revit Structure instead of doing hand calcs or to reenter the info in other small analysis tools. The reason why we call them simulation analysis is because our users will be able to easily simulate multiple options and create "what if" scenario. By making better decisions early in the design process, our customers will be able to produce better designs.

Static Analysis of 2D frames:

This extension lets you perform static analysis of a 2D frame defined in a Revit Structure model. It uses information from Revit Structure such as: frame geometry, frame members, constraints/supports, load cases, load combinations and loads. Results are displayed in both graphical (diagrams) and tabular form. Additionally, results may be presented in the form of a report (in the HTML format). The report for a frame can be printed, saved to a file or sent to a MS Excel© or MS Word© document.

Static Analysis of continuous beams:

This extension allows you to perform static analysis of a single or multi-span beam defined in a Revit Structure model. It uses information directly from Revit Structure such as: beam geometry, constraints/supports, load cases, load combinations and loads. Results are displayed in both graphical (diagrams) and tabular form. Additionally, results may be presented in the form of a report (in the HTML format). The report for a beam can be printed, saved to a file or sent to a MS Excel© or MS Word© document.

Reinforcement of slab corners:

This extension allows you to define both simple and complex reinforcement patterns for slab corners. It creates true 3D "intelligent" rebar data in Revit® Structure. It lets you define various types of reinforcement in corners with angles between 45 and 135 degrees. Just like any other Extension reinforcement macros, the model could be sent to AutoCAD Structural Detailing for automatic shop drawings

Reinforcement of retaining walls:

This extension creates true 3D "intelligent" rebar data in Revit® Structure. It lets you define reinforcement for a wall, footing, key and shelves, including inclined walls.

Just like any other Extension reinforcement macros, the model could be sent to AutoCAD Structural Detailing for automatic shop drawings

For this Extension, you need to make sure to download the right retaining wall profiles on the subscription site as well.

Automatic Reinforcement Generation:

Last but not least, this is a great Extension that you can consider as an umbrella Extension that drives all of the other Reinforcement Extensions

This extension lets you automatically generate reinforcement for a complete building or a selection of elements in the current project. The reinforcement is generated using default values of parameters for each typical reinforced concrete element, based on templates previously stored in data files, or defined by the user on an ongoing basis.

We have now a large library of reinforcement macros that you can use for many projects. They will allow you to populate rebar in Revit Structure, get quantities and specific details. As these Extensions allow you to communicate with AutoCAD Structural Detailing, you can also produce the shop drawings for these typical components (learn more)

Enjoy these new tools and get even more productive!

Nicolas

Get Certified on Autodesk Products at AU 2008 for FREE!!!!

From Shaan Hurley's Between the Lines blog

28 October 2008

Are you Attending AU 2008, Get Certified on Autodesk Products Free
Are you certifiable? This year at AU 2008 the Autodesk Product Certification exams are FREE. Just pick up one or more vouchers at the Autodesk Education & Learning booth in the AU 2008 Exhibit Hall. It is first come, first served due to limited space so make a direct and fast line for the Autodesk Education & Learning booth when the Exhibit Hall first opens.

AutoCAD
AutoCAD Architecture
AutoCAD Civil 3D
Autodesk Inventor
Revit Architecture

Autodesk University 2008 Certification-related activities include the following:
Onsite Testing – AutoCAD®, AutoCAD® Architecture, Autodesk® Inventor®, Revit® Architecture, and AutoCAD® Civil 3D® software. Exams available on a first-come, first-served basis.

Certification Preparation Classes – Classes designed to help you pass the AutoCAD and Autodesk Inventor 2009 Associate and Professional Certification exams.

Academic Certification Class – Educators should be sure to attend Academic Certification: Give Your Students a Head Start in their Design Careers to learn more about offering their students Autodesk Professional Certification at affordable academic pricing.

Professional Certification Class – Want to hear what it’s all about? For an overview of the new 2009 program, attend Getting Certified: Get the Recognition and Rewards You Deserve.
Autodesk Bookstore – The spot to purchase Certification preparation materials from Autodesk Learning. In the Exhibit Hall.

More Details: http://au.autodesk.com/event/campusclass/certification/

This is one more reason and benefit why attending AU 2008 is cost effective and a great way to be more productive and network with the best in the world. You can also show your experience and knowledge in a official certification when you return back home to your office.

Cheers, Shaan

ADAPT-Builder link for Revit Structure

From BIM and Beam

ADAPT-Builder - integration link for Revit Structure is now available!

Revit Structure 2009 meets ADAPT-Builder.

The 3rd generation of the integration link is now available.

The bi-directional integration offers ease-of-use by directly transferring model information from Revit Structure to ADAPT and back at the basic physical model level.

Carry out your detailed slab and foundation system design using ADAPT's powerful 3D finite element analysis engines (ADAPT-Floor Pro and MAT) that automatically create analytical models from your imported Revit Structure model. Transfer potential geometry changes as well as reinforcement objects from ADAPT-Builder back into Revit Structure.

This saves hours in redundant model manipulation, data entry and dramatically reduces coordination errors.

View ADAPT-Revit integration video…

For more information, please go visit ADAPT

AU 2008 - Buddy Pass

From the AU 2008 website and Phil Read of HNTB Architecture.

AU 2008 Buddy Pass: “Economic Stimulus” for New Registrants

A tough economic climate demands the competitive edge only Autodesk University can deliver:

In-depth product training on all the software you use every dayPowerful business strategies and industry insights from trusted expertsThe best networking opportunities you’ll find anywhere
You don’t want to miss AU 2008—and we don’t want you to miss it either. To make it easier for you to attend, Autodesk has announced the AU 2008 Buddy Pass offer.

The AU 2008 Buddy Pass Offer from Autodesk

The Buddy Pass offer begins at 9:00 a.m. (PT) on November 5.

The first 100 people to register and fully pay for a regular* AU 2008 pass can invite a “buddy” to register for free.

When the 100 free Buddy Passes are gone, people who register and fully pay for a regular AU 2008 pass can invite a buddy to register for only US$595.

In addition, anyone who registered and fully paid for a regular AU 2008 pass before November 5 at 9:00 a.m. (PT) can also invite a “buddy.”

Note: The AU 2008 Buddy Pass offer is for a limited time only. Autodesk may end this offer at any time without notice.
Note: Only one (1) Buddy Pass per fully paid regular AU 2008 pass.

* Regular = four-day, all-inclusive

What’s Included In the Buddy Pass—and What Isn’t

Buddy Passes provide full access to all AU 2008 classes and functions.Buddy Passes do not include hotel.Buddy Passes do not include pre-registration for classes and labs—the Buddy Pass holder may attend classes and labs only if there is room available, and will be seated five minutes after the class or lab has begun.

Who’s Eligible—and Who Isn’t

Those who register and fully pay for a regular four-day, all-inclusive AU 2008 pass qualify for the Buddy Pass offer starting on November 5 at 9:00 a.m. (PT).Those who do not qualify for this offer include AU Speakers, Autodesk employees, Exhibitors, and any other holders of discounted passes.

How to Take Advantage of the AU 2008 Buddy Pass Offer If…

You Are NOT Currently Registered for AU 2008

Register online on, or after, November 5, starting at 9:00 a.m. (PT).

A site notice will tell you if:

A free Buddy Pass is still available—orA US$595 Buddy Pass is still available—or The Buddy Pass offer is no longer available

If a Buddy Pass is available, and you complete the registration process, during confirmation a promotion code will be generated. Give that code to your buddy to use when registering. Depending on which Buddy Pass offer is available to you, your buddy can register for free or US$595. If the Buddy Pass offer is no longer available, no code will be generated, and no Buddy Pass will be offered.

Note: Online registration ends November 14.

You ARE Currently Registered for AU 2008

Contact the Autodesk University Registration Team—see contact information, below—on, or after, November 5 starting at 9:00 a.m. (PT), and request a Buddy Pass promotion code.

A member of the AU Registration Team will tell you if:

A free Buddy Pass is still available—orA US$595 Buddy Pass is still available—orThe Buddy Pass offer is no longer available
If you hold a regular, fully paid four-day, all-inclusive AU 2008 pass, and a Buddy Pass is available, you will be given a promotion code. Give that code to your buddy to use when registering, and, depending on which Buddy Pass offer is available to you, your buddy can register for free or US$595.

To call or email the Autodesk University Registration Team:

1-888-371-1722 (toll-free in the United States)
1-415-446-7717 (outside the United States)
autodeskuniversity@autodeskevents.com

Revit Architecture Training @ JCCC

Johnson County Community College will be offering another Revit Architecture class starting 02/14/09 and going until 05/09/09. This is a Saturday class from 9am to 12:30pm. This is a 2 credit hour class.

The bad news is that the class will be using Revit Architecture 2008. I know, I know. Please don't get me started. I already tried to get them to upgrade, but I couldn't get any traction.

If you are interested in the class, you can get a little more information at JCCC.

I have been asked if JCCC will be teaching Structure or MEP but I do not believe this will happen. Contact JCCC though for more specific information.

Revit Flavor Comparisons - from MasterGraphics

From MasterGraphics

I’ve been asked many times about the differences are between Revit Architecture, Revit Structure and Revit MEP? Are they the same with different tool sets? Is Structure the same as Arch with expanded tool set? Is MEP Arch with an expanded tool set? Can I get all 3 in one?

Well, you can’t get all 3 in one (man, I sure hope Autodesk can do something about this!!). As for the other questions about the differences between the 3 apps, there are a few things that are different. One of those is being the families that come with each product. I hope to soon look at the main differences and will post and update when I do.

Another is the External Tools that are available to each product. For example, Arch and MEP will not allow you to tie your model to a Structural Analysis program like Structure can. MEP, will allow you to tie into Trane Trace, but Arch and Structural cannot. Just take a look at the Extensions provided by Autodesk…there is a separate set for each program.

The next and maybe the most asked is the actual tools that are in each program. Well, there are many commands that are available in all 3, some in 2, some in just one. I’ve put together a document that lists out the command tools between the 3 products. I did not list every single command tool, just the ones that are not available in all 3 via the pull-down menus. You can download the document HERE.

Large Project Management - Central File

I have been meaning to post this for awhile, just not enough hours in the day.

I have been asked numerous questions about Large Project Management, so I thought I would put together several posts on that topic. I am sure that my boss Phil Read of HNTB Architecture and and my friend Daniel Hurtubise of RevitIt (update your blog you crazy Canadian) will also have some comments on this very subject as well.

One important topic that I think gets overlooked from time to time is Saving to Central, so here are my comments on the matter.

Save to Central:
• Some will say that there is no clear rule for the best practice on how frequently users should save to central. Because a Save to Central can utilize substantial amounts of time to process and utilizing a great deal of network bandwidth, you are probably not going to Save to Central too often. That being said, you don't want to go too often without saving, because the local file(s) will be way out of sync with the Central file.
• We generally recommend that users perform local saves often. We recommend that users perform a local Save every 15 minutes and then 15 minutes later perform a Save to Central every 15-20 minutes depending on the size of the project. (I used to think this was too often, but has Daniel pointed out to me, the more often you STC, the less data that is being transmitted back and forth).

Another Autodesk Acquisition

October 23, 2008

Dear Autodesk/Softimage Customer,

We are pleased to announce that Autodesk and Avid Technology have signed a definitive agreement for Autodesk to acquire substantially all of the assets of Softimage, a Canadian subsidiary of Avid Technology. We are excited by this opportunity to join forces, combining two strong teams into a world-class center for computer graphics software research and development.

Both Softimage and Autodesk Media & Entertainment are headquartered in Montreal, Canada. Softimage has been developing state-of-the-art 3D technology for more than 20 years. Its products are recognized as best-ofbreed in the entertainment industry. With nine million users, Autodesk is a world leader in 2D and 3D design software for the media and entertainment, manufacturing, building and construction markets.

Softimage's technology complements Autodesk's entertainment products. Many film, television and game pipelines include products from both companies. Adding Softimage products and technology to Autodesk's entertainment product line will allow us to offer you more complete and efficient workflows.

Upon completion of the acquisition, you will still be able to choose your favorite 3D modeling, animation and rendering solution – whether it is SOFTIMAGE® |XSI®, Autodesk® 3ds Max® or Autodesk Maya® software. We intend to continue driving innovation in all three products. Following close, we will also focus on improving interoperability through the Autodesk® FBX® software 3D data exchange solution to help improve your production efficiency when working with multiple Autodesk applications.

We are also excited by the proposed addition of Softimage talent and technology to Autodesk Media & Entertainment, as it will accelerate the work of our newly formed Games Technology Group, which includes technologies such as Autodesk® HumanIK® and Autodesk® Kynapse® software. The group's purpose is to deliver the next-generation of real-time, interactive 3D authoring tools for games, film and television.

Autodesk will acquire and plans to continue developing the following Softimage products:

SOFTIMAGE|XSI, including XSI Essentials, XSI Advanced, XSI Academic, XSI Mod Tool and the XSI software development kit (SDK). XSI offers a complete 3D modeling, animation, rendering and development environment.
SOFTIMAGE®|Face Robot® software, which enables the creation of life-like human facial animation quickly and easily.
SOFTIMAGE®|Cat™, an advanced character animation system that is a plug-in for Autodesk 3ds Max software. It is intended that SOFTIMAGE|Cat will be integrated into the 3ds Max product line.
SOFTIMAGE®|Crosswalk, an interoperability solution, is intended to be integrated with Autodesk's interoperability technology.
The acquisition is expected to close in the next month. Until that time, Autodesk and Softimage will continue operating independently. Please continue using your existing contacts for sales, services and support. We will keep you updated on this acquisition, both directly and online at www.autodesk.com/softimage.
We look forward to welcoming you to the combined family and thank you for your business.

Sincerely,


Marc Petit
Senior Vice President,
Autodesk Media & Entertainment Marc Stevens
General Manager
Softimage
Autodesk is a registered trademark of Autodesk, Inc., in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2008 Autodesk, Inc. All rights reserved.
Thank you for your continued interest in Autodesk products. Autodesk respects your time and privacy. If you would prefer not to receive future e-mails about our products or events, or have received this e-mail in error, please click on the unsubscribe link at the bottom of this page.

Autodesk, Inc., 111 McInnis Parkway, San Rafael, California, 94903

Revit Structure Plug-In

SI Tools for Revit® Structure is a Revit Structure add-in that provides advanced selection capabilities for structural members. Use the toolbar buttons to quickly select all beams, columns, or walls on a single level or in the entire model, regardless of type or material. Or use the Advanced Selection options to select a custom combination of beams, columns and walls.

Want to identify all 8X10 members, both beams and columns? Or select all concrete members, regardless of size? Or do you need to quickly find all members designated “not for analysis”? It is easy with SI Tools for Revit Structure.

I have not had the time to install or use this tool, but would be interested to here some comments from those who have.

BIM Survey

Kansas City Revit User Group Members,

Mark W. Kiker, Chief Information Officer - Assoc. AIA of HMC is looking for your input.

Mark is conducting a survey for a class that I am putting together on the BIM Manager position to be presented at Autodesk University 2008.

Here is the class outline…

BIM Manager - The Newest Position - BIM Manager, BIM Leader, BIM Coach, BIM Coordinator. Just some of the titles being handed out to those forward thinking BIM leaders. There is a new position that is developing as BIM progresses. It is one dedicated to overseeing BIM projects. Is it different that CAD Manager? Is it the same? What duties should a BIM Manager be doing? What are the same? Is this a short term evolution or is the CAD Manager being replaced? Discover what it takes to be a BIM Manager.

Please take 5 minutes to complete the two surveys below. If you are not the “hands on” person managing BIM at your firm, please forward this on to them for participation. I will be sharing the results of the survey with all of the participants that supply their email address at the end of the surveys.

=> BIM Position Survey
=> BIM Software and Project Survey

Thanks,

Mark W. Kiker
Chief Information Officer - Assoc. AIA
HMC