Tuesday, April 26, 2011

Revit OpEd: Tip - List of All Levels via Grid Generator Extens...

Revit OpEd: Tip - List of All Levels via Grid Generator Extens...: "This tip is courtesy of Daniel Stine, author of several Revit books (listed in previous post). If you are familiar with the Grid Generator e..."

MEP-BIM-Guru: Pipe Volume Schedule

MEP-BIM-Guru: Pipe Volume Schedule: "I will go over how I set up a pipe volume schedule in Revit MEP. Pipe Types: For this example I have the pipe types set up with one pipe ..."

Revit 2012 Network Deployment Issues

With the release of the Revit 2012 platform, the first issue I found was with network deployments. The issues I found were that there is no method to define the Default Project Template. After installing the Deploy, the New Project Template it points to is 'Default.rte'. There is also not a method for altering the various library locations.

A few emails to the factory and I was provided with the following information. This is procedure is definitely a work-around and hopefully the actual network deployment is corrected soon.


Customizing Revit.ini
Rick Foster
4.22.2011

The Document

Revit.ini is created at install time using data from an xml document. By modifying that document you can distribute customizations with your deployment.
Identical copies of this document are potentially located in four places in your admin image:
\x86\RAC2013\inifile.xml
\x86\RAC2013\Program Files\Autodesk\Root\Program\Setup\Cache\inifile.xml
\x64\RAC2013\inifile.xml
\x64\RAC2013\Program Files\Autodesk\Root\Program\Setup\Cache\inifile.xml
You probably only have two of the copies in your admin image, either x86 or x64. That is fine.
Copy one of these locally and open it up. You'll notice that inifile.xml updates more than just revit.ini. Ignore the other ini files - those are mine.
It should be apparent what's going on. The elements are structured File->Section->Data. Knowing this you are ready to do some easy tasks. You can:
·       Change a value by updating an existing Data element
·       Add a key to a section by creating a Data element
·       Add a section to an ini file by creating a Section element
Example - Pointing to a custom Family Templates path
1.     Locate this Data element:
File Name="Revit.ini"
  Section Name="Directories"
    Data Key="FamilyTemplatePath"
2.     Set the text of that element to your custom Family Templates location.
Ok, I sense a few of you have already started searching for DefaultTemplate and encountered some oddities, like Product attributes and Condition elements, and that the values are set to bracketed properties. Not to mention that there’s a bunch of DefaultTemplate elements. Well, it’s about to get interesting.
Product
Ties a setting to a specific product
Condition
Evaluated as a Window Installer condition – beyond the scope of this document
[PROPERTY]
Windows Installer property. These properties are the internal state of the install
The Short Story:
You can delete all of those DefaultTemplate elements except for one. Remove the Product attribute and Condition element and set the value to wherever your template resides.
The Long Story:
Inifile.xml serves all Revit products, which the Product attributes reflect. Additionally, each product serves multiple disciplines. In order to point the DefaultTemplate to the correct file we created multiple DefaultTemplate elements tied to specific products, each with a condition that further binds it to the discipline selected at install time.
Whether you find that confusing or empowering will be determined by how well I communicate the next topic.

Using Properties in Revit.ini

Properties are the variables passed around in the install. Inifile.xml uses them to respond to user selections. Content Packs use them as well, and even have the ability to set them. Additionally, there is syntax for reading environment variables. Here is how you can leverage both.

Environment Variables

You can use environment variables in inifile.xml by using the syntax [%ENVVAR]. Danny, please test: The practical upshot: You can create a script to call setup.exe. If you set environment variable before doing so then those variables can be used in inifile.xml.
This is quite powerful, and may be all that you need for your customizations. But wait, there’s more…

Custom Content Packs

Revit distributes content using the Content Pack framework. Check out the sample below. Content Packs have an ApplicationDefaults section for setting properties. You can create your own Content Pack and add it to a deployment (or install). The install will process it and set the properties for you. The sample will set YOURCUSTOMPROPERTY to Your Custom Value. You can now use that in inifile.xml by referring to [YOURCUSTOMPROPERTY].
Add this custom Content Pack to your deployment by clicking the Add Content button in the Revit panel on the Select Products page. Then ensure that your Content Pack is selected in the Default Content combobox.
Is that useful? It may be if you have one admin image supporting multiple deployments. Each deployment can integrate a different custom Content Pack to set unique properties for inifile.xml to use. Or you could even use the stock inifile.xml and just create a Content Pack to manipulate the properties that you are interested in.

The End

That’s it. The power to greatly complicate a deployment is now yours. Enjoy!

Supplemental information

Editing XML documents

XML documents are highly structured. If you goof this one up then none of the ini files it defines will be created. Fortunately inifile.xml has a DTD, which is a formatting definition that instructs validation tools on how to check the consistency of a document. To operate on inifile.xml with confidence do one of two things.
·       Use an XML editor. Google up a free one. It will highlight your mistakes. (witticism placeholder)
·       If you don’t use an xml editor, but prefer Notepad or some such, validate your efforts here.

Custom Content Pack sample

Cut and paste the following into a blank xml file. Be sure to change Identification->ContentPackId and Identification->Name. The document.xsd referred to in the second line is a schema that will help you edit and validate this xml document. You can find it on the disk in Content/Revit/en.
xml version="1.0" encoding="utf-16"?>
<DocumentRoot xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="document.xsd">
  <Identification>
    <ContentPackId>TemplateCPContentPackId>
    <Name>Content Pack template for custom settingsName>
  Identification>
  <ApplicationDefaults>
    <Property Name="RVT_PATH_LIBRARIES" Value="\\Server\Share\Custom Libraries"/>
    <Property Name="RVT_DEFAULTTEMPLATE_ARCHITECTURAL" Value="[C_TEMPLATES]\Custom Templates\default.rte" />
    <Property Name="RVT_DEFAULTTEMPLATE_CONSTRUCTION" Value="[C_TEMPLATES]\Custom Templates\Construction-Default.rte" />
    <Property Name="RVT_FAMILYTEMPLATEPATH" Value="[C_FAMTEM]" />
    <Property Name="YOURCUSTOMPROPERTY" Value="Your Custom Value" />
  ApplicationDefaults>
DocumentRoot>

Monday, April 25, 2011

Revit OpEd: Tip - Control Visibility of Image via Size Paramet...

Revit OpEd: Tip - Control Visibility of Image via Size Paramet...: "You can't control the visibility of an image file like you can other elements in a Revit family, such as mapping a parameter to the 'Visible..."

a [BIM] New World - Repost

Teresa Martin of a [BIM] New World blog has a good post on Search and Selection sets for Navisworks.

 Thursday, April 14, 2011

Search and Selection Sets Part II


Alas! It has been a month or two since Part I. Here is part II, of the long awaited sequel!

As I mentioned in Search and Selection Sets Part I (Post Dated 1-31-2011), Search Sets are the gold in Navisworks. This is where you get to drive. This is where you have all the control. Search Sets, as mentioned are based upon common data properties such as size, name, type, file, units, etc. This is why they are so powerful! If you know the common property to search for, you work here is done! And most importantly, you can re-use searches in different projects if they search for similar properties.

As an example, imagine a file imported from Revit (via *NWC Export). Revit, being the wonderful property based BIM format that it is, contains loads of property data (both instance and type). Now, envision some of the common properties in every Revit file, such as walls, ducts, beams or windows. You can set up a search in Navisworks to find all the walls or windows in the file (see image below).



In the data set shown above, I created a Search Set based upon the Revit Type Property: Wall. When I change this data set in Revit by adding a few additional interior walls, you can see that the Search Set automatically updates. Notice how there are now 9 walls, as opposed to 7 in the previous search.

Thinking outside the box, once you have these searches saved, they can be exported and imported into any other project. To export the Search Sets from a project, simply go to the application menu and choose Export>Search Sets The file will export your searches as an *XML file. You can then import the searches into another project using the import option from the application menu.


From a project perspective, Search Sets can be taken a step farther if you consider file and folder conventions as well. For instance, I can load data from a folder on my desktop named "Demo Files".

As I add additional data sets to this folder and append the *NWF file, the Search Set updates. For those of you seeing the big picture here, your job of updating the project from week to week just became a whole lot simpler if you took the time at the beginning of the project to create a tidy file and folder structure. If your current filing system looks anything like the storage system in my basement, you might need to do a little spring cleaning here to smite your errant file/folder conventions to alleviate the issue.

The image below shows how I set up my search to find a particular folder on my desktop. Of course for your office, you will want to path this to a server location and not your desktop for company wide use.


As a final thought, for those using Revit, you could put some custom shared parameters in the file to easily track in Navisworks, such as a FM parameter for items that need to be tracked for Facilities Management, etc.

Next month, I will be discussing the Appearance Profiler. Stay tuned!

Apr 14 - Autodesk Offers Europe BIM Survey Report

Apr 14 - Autodesk Offers Europe BIM Survey Report

Sunday, April 24, 2011

Happy Birthday Steve

If you use Revit, there are are probably a few names that come to mind like Steve Stafford of RevitOpEd. Well, today is his Birthday! Happy Birthday.

Help Steve celebrate by attending the Revit Technology Conference and making him buy you a drink.

Revit OpEd: Keynote Application Update

Revit OpEd: Keynote Application Update: "Steve Faust is getting the word out that he has updated the application he created to improve our interaction with Revit Keynoting feature. ..."

Navisworks Add-on Applications

Publisher Add-on - Automated publishing of NavisWorks project files

DatalinkTools - Interface between NavisWorks models and the design data and documentation

Reporter Add-on - Report generating functionality for Navisworks models

Surveyor can be used with or without DataTools to view Property Value attrributes associated with objects in Search and Selection sets and then to report on any of these Property values in Excel. So anyone using Excel can view project data for MTO and analysis.

DocuLink+ enables any external document to be viewed simply by linking it to a Property value attribute associated with one or several objects. This broadens the value of NavisWorks® by making available a much wider range of data which is of interest to many more people than just design engineers or project managers.

Navistools DataManager - unique interface between Navisworks models and the design data


Navistools Reporter – generate material take-off / components reports directly from Navisworks model


Saturday, April 23, 2011

Revit OpEd: Dept. of Echo - Installing 2012 Products

Revit OpEd: Dept. of Echo - Installing 2012 Products: "David Harrington mentions this morning that it is easy to overlook the option to customize your installation. See that little 'down-arrow'..."

Friday, April 22, 2011

Revit 2012 Product Keys - Autodesk Support

2012: Where to find your Autodesk Revit 2012 Product key

You want to know the product key for your Autodesk® Revit® 2012-based product. 
Autodesk's 2012-based software requires both a serial number and product key to successfully activate.
Product keys are used to differentiate software sold on its own from those sold as part of a suite. Ensure that you select the correct product key in order to successfully activate your software.
The product key is provided along with your serial number in the following places:
  • If you received physical media, the product key is on the reverse of the package along with the serial number.
  • Emails from Electronic Fulfillment notifying you of your new serial number also include the product key.
  • Contract administrators can log on to Subscription Center to check for their serial number and product key.
  • The Autodesk Business Center (ABC) can provide this information. Their toll-free number is 800-538-6401.
Revit 2012 - based product keys:
  • 240D1 - Revit Architecture 2012
  • 255D1 - Revit Structure 2012
  • 297D1 - Revit MEP 2012
  • 241D1 - AutoCAD Revit Architecture Suite 2012
  • 256D1 - AutoCAD Revit Structure Suite 2012
  • 257D1 - AutoCAD Revit MEP Suite 2012
  • 765D1 - Autodesk Building Design Suite Premium 2012
  • 766D1 - Autodesk Building Design Suite Ultimate 2012 Autodesk Support

Is anyone using Deep Space for analytics? https://www.deepspacesync.com/