Revit OpEd: Three Laws - Family Content

Revit OpEd: Three Laws - Family Content: This is repost of a post that I wrote in September 2008. I thought of it as I was working through some content tasks. Not to be confused ...

Working with DWG files in Revit

It might not seem obvious, but it is very important clean up DWG files before importing or linking into AutoCAD. Revit is not AutoCAD and it is important to note that Revit will not behave like AutoCAD. So we need to take this into account when working with DWG files. Spending a few minutes cleaning up a DWG file before importing or linking that file can prevent real problems from occurring down the road.

Here are some items to consider when working with DWG files in AutoCAD.

1.     Be aware how far the CAD geometry is from 0,0,0. Different versions of Revit get squirrelly if the geometry is either greater than 2 miles or 20 miles from 0,0,0 in AutoCAD. While you are checking this, look for scratch or unnecessary geometry that might just be hanging out somewhere. If you don’t need it, get rid of it. Use Zoom extents in AutoCAD to see the extents of the geometry.

2.     Review the layers in AutoCAD. Make sure you are aware of what is on/off or frozen / thawed. If there is geometry on layers that are hidden or frozen, consider deleting that geometry and purging the layers. Put the DWG file on as much of a diet as you can.

3.     Be aware of blocks that are using in the DWG. If you are experiencing display issues in Revit, the issue might be with the block. It’s only been a problem for me a couple of times and exploding the blocks in AutoCAD corrected the issue. The simpler the CAD file, meaning few blocks, xrefs, etc that are in the DWG file, the better.

4.     Put the DWG on a Diet. Purge ANY and ALL unused layers, blocks, styles, etc from the DWG. The less Revit has to track the better.

5.     Verify your units of the DWG file before importing.

6.     Watch out for really small geometry. Revit will generate a warnings for lines that are smaller 1/32” or 0.75mm.

7.     Consider linking or importing DWG files onto a separate workset.

8.     If you only need to see a DWG in a single view, always use the Link to Current View Only option.

9.     I think this goes without saying, but worth repeating. To everything possible to avoid exploding imported DWG files.

Network Deployments - Include Additional Software

If you are working with Revit then you at some point must have dealt with the issues of installing these add-ons. For the Revit 2014 releases, I decided to incorporate the installation of several add-ons such as:

• DB Link
• Model Review
• Batch Print
• Worksharing Monitor
• Revit Extensions

The documentation on how to incorporate this information into the network deployment is a little weak. I initially went down the road of determining how to create silent installs for each of these add-ons, but I was was over thinking it.

As you are creating your network deployment, you will notice that one of the sections is to "Include additional software" (see below).

This allows you to add additional .msi and .exe software to your deployment. If you adding the Autodesk Revit add-ons (with the exception of Revit Extensions), you just need to click the "Add..." button and select the add-on. You do not need to specify any Command Line Parameters.

For Revit extensions, you first need to extract the install package from the executable zip file that you downloaded from the subscription site. If you accept the defaults, the files will be extracted to C:\Autodesk\REX_2014_dlm\. Back in your network deployment, Include additional software, you want to add either the REX_x64.msi (64-bit) or REX_x86.msi (32-bit) depending on the Revit deployment you are creating. You do not need to add and Command Line parameters.

When you are done adding your additional software to include in your deployment, you can close the "Include additional software" and complete your network deployment. As your network deployment is being created, the add-ons that you have selected will be copied from the location you selected to the ...\Img\ADDONS\ folder of the network deployment. Once the network deployment has finished copying all the files, hold off on performing a test installation.

The Revit Extension addon only copied over the .msi file of the installation.We need to copy over the rest of the required installation folders from C:\Autodesk\REX_2014_dlm\REX\ to ...\Img\ADDONS\ADDON_REX_X64_0\

Your ...\Img\ADDONS\ADDON_REX_X64_0\ directory should now look as follows

Revit OpEd: Copy Then Paste a Level

Revit OpEd: Copy Then Paste a Level: Ever have someone want to use Copy to Clipboard and then Paste Aligned to create a new level? I haven't but it is technically possible t...

Revit OpEd: Revit MEP - Free Size Parameter

Revit OpEd: Revit MEP - Free Size Parameter: If you use the Free Size parameter instead of Size you might notice a subtle anomaly. In elevation views where we only see one dimension o...

Autodesk Labs - Project Falcon

Project Falcon is a new way to investigate aerodynamic performance. Its speed and accuracy work in concert with physically intuitive controls for defining wind direction and speed. At the heart of Falcon is a cutting-edge approach to CFD simulation that removes barriers to meshing coupled with a unique numerical method that allows a broader design audience to benefit from simulation early in the design process.

The technology preview can be used as a standalone application with no other license required or as an add-on for Inventor or Revit.

Autodesk Labs: Project Falcon YouTube videos

Invitation to complete BIM for FM survey

From Linkedin:

We are conducting research to assess the challenges and opportunities that BIM presents for the FM community. The study forms part of an MSc thesis for the University College London (UCL) and will explore the following areas:

• FM Software (CAFM/ CMMS/ IWMS): take-up and awareness levels
• BIM: take-up and awareness levels
• Drivers and barriers to full FM participation in BIM development and application
• Integration and exchange of information between FM Software and BIM

Your input will provide real world opinions on BIM for FM and help to identify how important BIM is for the industry.

The survey will take approximately 5 to 10 minutes to complete. Simply click on the link below, or cut and paste the entire URL into your browser to access the survey:

https://kwiksurveys.com/s.asp?sid=znj7ggyrmo40sh5181153

Your input is very important to us and will be kept strictly confidential (used only for the purposes of research for this project).

If you have any questions or would prefer to complete a paper survey please contact us at r.williams.12@ucl.ac.uk

Autodesk 2014 Product Keys

Product Name	Product Key
AutoCAD 2014	001F1
AutoCAD Architecture 2014	185F1
AutoCAD Civil 3D 2014	237F1
AutoCAD Design Suite Premium 2014	768F1
AutoCAD Design Suite Standard 2014	767F1
AutoCAD Design Suite Ultimate 2014	769F1
AutoCAD ecscad 2014	562F1
AutoCAD Electrical 2014	225F1
AutoCAD Inventor LT Suite 2014	596F1
AutoCAD LT 2014	057F1
AutoCAD LT Civil Suite 2014	545F1
AutoCAD Map 3D 2014	129F1
AutoCAD Mechanical 2014	206F1
AutoCAD MEP 2014	235F1
AutoCAD P&ID 2014	448F1
AutoCAD Plant 3D 2014	426F1
AutoCAD Raster Design 2014	340F1
AutoCAD Revit Architecture Suite 2014	241F1
AutoCAD Revit LT Suite 2014	834F1
AutoCAD Revit MEP Suite 2014	257F1
AutoCAD Revit Structure Suite 2014	256F1
AutoCAD Structural Detailing 2014	587F1
Autodesk 3ds Max 2014	128F1
Autodesk 3ds Max Design 2014	495F1
Autodesk 3ds Max Entertainment Creation Suite Premium 2014	774F1
Autodesk 3ds Max Entertainment Creation Suite Standard 2014	661F1
Autodesk Alias Automotive 2014	710F1
Autodesk Alias Design 2014	712F1
Autodesk Alias Surface 2014	736F1
Autodesk Animation Academy 2014	548F1
Autodesk AutoCAD Utility Design 2014	213F1
Autodesk Building Design Suite Premium 2014	765F1
Autodesk Building Design Suite Standard 2014	784F1
Autodesk Building Design Suite Ultimate 2014	766F1
Autodesk Design Academy 2014	200F1
Autodesk Display Cluster Module for Autodesk VRED Design 2014	889F1
Autodesk Education Master Suite 2014	651F1
Autodesk Entertainment Creation Suite For Education 2014	656F1
Autodesk Entertainment Creation Suite Premium 2014 Exclusives	P02F1
Autodesk Entertainment Creation Suite Standard 2014 Exclusives	P01F1
Autodesk Entertainment Creation Suite Ultimate 2014	793F1
Autodesk Fabrication CADmep 2014	839F1
Autodesk Fabrication CAMduct 2014	842F1
Autodesk Fabrication CAMduct Components 2014	844F1
Autodesk Fabrication ESTmep 2014	841F1
Autodesk Fabrication RemoteEntry 2014	845F1
Autodesk Fabrication Tracker 2014	843F1
Autodesk Factory Design Suite Premium 2014	757F1
Autodesk Factory Design Suite Standard 2014	789F1
Autodesk Factory Design Suite Ultimate 2014	760F1
Autodesk Infrastructure Design Suite Premium 2014	786F1
Autodesk Infrastructure Design Suite Standard 2014	787F1
Autodesk Infrastructure Design Suite Ultimate 2014	785F1
Autodesk Infrastructure Map Server 2014	796F1
Autodesk Infrastructure Map Server 5 Activations 2014	877F1
Autodesk InfraWorks 2014	808F1
Autodesk Inventor 2014	208F1
Autodesk Inventor Engineer-to-Order Series 2014	805F1
Autodesk Inventor Engineer-to-Order Server 2014	752F1
Autodesk Inventor LT 2014	529F1
Autodesk Inventor Professional 2014	797F1
Autodesk Maya 2014	657F1
Autodesk Maya Entertainment Creation Suite Premium 2014	775F1
Autodesk Maya Entertainment Creation Suite Standard 2014	660F1
Autodesk MotionBuilder 2014	727F1
Autodesk Mudbox 2014	498F1
Autodesk Navisworks Manage 2014	507F1
Autodesk Navisworks Simulate 2014	506F1
Autodesk Plant Design Suite Premium 2014	763F1
Autodesk Plant Design Suite Standard 2014	788F1
Autodesk Plant Design Suite Ultimate 2014	764F1
Autodesk Product Design Suite for Education 2014	654F1
Autodesk Product Design Suite Premium 2014	782F1
Autodesk Product Design Suite Standard 2014	783F1
Autodesk Product Design Suite Ultimate 2014	781F1
Autodesk Raytracing Cluster Module for Autodesk VRED 2014	890F1
Autodesk Real-Time Ray Tracing Cluster 2014	692F1
Autodesk Revit 2014	829F1
Autodesk Revit Architecture 2014	240F1
Autodesk Revit LT 2014	828F1
Autodesk Revit MEP 2014	589F1
Autodesk Revit Structure 2014	255F1
Autodesk Robot Structural Analysis Professional 2014	547F1
Autodesk Showcase 2014	262F1
Autodesk Showcase Professional 2014	295F1
Autodesk Simulation CFD 2014	809F1
Autodesk Simulation CFD 2014 Advanced	810F1
Autodesk Simulation CFD 2014 Connection for NX	815F1
Autodesk Simulation CFD 2014 Connection for Parasolid	824F1
Autodesk Simulation CFD 2014 Connection for Pro/E	822F1
Autodesk Simulation CFD 2014 Design Study Environment	812F1
Autodesk Simulation CFD 2014 Motion	811F1
Autodesk Simulation DFM 2014	837F1
Autodesk Simulation Mechanical 2014	669F1
Autodesk Simulation Moldflow Adviser Premium 2014	571F1
Autodesk Simulation Moldflow Adviser Standard 2014	570F1
Autodesk Simulation Moldflow Adviser Ultimate 2014	572F1
Autodesk Simulation Moldflow Insight Premium 2014	574F1
Autodesk Simulation Moldflow Insight Standard 2014	573F1
Autodesk Simulation Moldflow Insight Ultimate 2014	575F1
Autodesk Simulation Moldflow Synergy 2014	579F1
Autodesk Simulation Multiphysics 2014	667F1
Autodesk SketchBook Designer 2014	741F1
Autodesk SketchBook Pro for Enterprise 2014	871F1
Autodesk Softimage 2014	590F1
Autodesk Softimage Entertainment Creation Suite Standard 2014	662F1
Autodesk Vault Collaboration 2014	549F1
Autodesk Vault Collaboration AEC 2014	801F1
Autodesk Vault Office 2014	555F1
Autodesk Vault Professional 2014	569F1
Autodesk Vault Workgroup 2014	559F1
Autodesk VRED 2014	884F1
Autodesk VRED Design 2014	885F1
Autodesk VRED Presenter 2014	888F1
Autodesk VRED Professional 2014	886F1
Autodesk VRED Server 2014	887F1
CADdoctor for Autodesk Simulation 2014	577F1
mental ray Standalone 2014	718F1
RealDWG 2014	151F1
T1 Enterprise Multi-flex 2014	535F1
T1 Enterprise Multi-flex Standard Bundle 2014	891F1

Revit OpEd: Revit MEP 2014 - Reapply Type

Revit OpEd: Revit MEP 2014 - Reapply Type: This button snuck past me in my reading about what's new. I don't see anything at all about it in the What's New documentation a...

Redlining & Revit

Regardless what you think about Revit, you’ll probably agree that Revit is disruptive technology. You can push rope and try to adapt CAD functionality to Revit or you can adapt/change your workflow to accommodate Revit’s workflow. This process change, good or bad is disruptive. The choices you make can mean the difference between profit and lose on a project.

One area that Revit provides that opportunity for process change is with Redlines. With Revit and Design Review we have an opportunity to create and manage redlines differently than what has been done in the past. This does not mean that the  Revit/Design Review process is better or worse, it’s just different.

Pen & Paper / Redlined PDF

Traditionally redlines have been created using red pen on paper and that gets passed off to someone to get picked up. Those redlines can be scanned and a PDF created or electronic documents can be marked up electronically and passed onto someone to get picked up. As the person picks up the redlines they may or may not highlight which items have been picked up. At some point, we hope that someone then back checks to make sure that the redlines were picked up and addressed correctly.

There are many pros and cons to this workflow. On the Pro side, it is a workflow that is familiar to most users and good or bad, familiarity makes people more comfortable. The Cons to this workflow is that the redline is not integrated into Revit like an overlay, it’s external.

Revit / Design Review

An Alternate workflow to creating and managing redlines is to utilize the Deisgn Web Format (DWF) as a distribution and communication of redlines. DWF files are in many like PDF files, but you use the Design Review application to markup the documents electronically and those redlines/markups can then be linked back into Revit as an overlay. As the markups are addressed, comments can be added.

Before I go into the process, let’s talk about the CONS to this approach. The BIG CON is that DWF markups have to be created digitally using Design Review. It’s been my experience that the drawback is with people learning to digitally markup drawings rather than using pen on paper. In fact, I’m guilty of it. If I have a choice, pen on paper is my preferred method as marking up with the mouse sucks. There is an improvement though when working with a tablet, especially one of the higher end models like the Wacom Cintiq pen displays.

Workflow

The first thing we need to have to create markups in Design Review with DWF files is Sheets in our Revit model. Revit allows you to export sheets and views to either a DWF or DWFx file type. Now is probably as good a time as any to explain the difference between a DWF and DWFx file. DWFx allows you to export the 3D model and any associate parameter data associated with the objects. DWF/DWFx can be used to export sheets and views to a file.

If you want to use the DWF file to roundtrip redlines (Revit to Design Review to Revit) then you have to export sheet. When we have sheets, we can then export DWF file. From the Revit application button (Big R) select Export > DWF/DWFx.

Figure 1

The DWF Export Settings dialog (Figure 2) will open and this allows us to specify what sheets/views we want to export and to adjust DWF/DWFx export settings. In the View/Sheets tab, select the from the Export: dropdown. From the Show in list: dropdown, select Sheets in the Model, this will allow you to select from just the sheets in the model. Select all the sheets.

Figure 2

After you make your selection, you can save your selection for future use by using the New Set button as shown in Figure 3.

Figure 3

Click the Next button to save your file and export your sheets. The exported DWF file can then be opened in Design Review and your markups added.

Design Review is very similar to Acrobat or Bluebeam. There are tools to make it comments, redlines, measure, query, etc. They are very straightforward and simple enough to use.

Figure 4

As you make your redlines, Design Review keeps track of those markups. Figure 5 shows an example of some markups. Notice the second column of symbols that I have highlighted in Figure 5. These show the status of the markup. The outline of a checkmark means no action has occurred to that markup in Revit. A green checkmark means the markup has been marked as Done. The question mark means that markup has been marked with a question.

Figure 5 - Markup Tracking in Design Review

This markup tracking system helps everyone associated with the redlines keep track of what has been done, what needs to be done and what items need further clarification.

Once you have marked up the DWF file in Design Review, we can link it back into Revit. We Link in a DWF markup set like we would a Revit or CAD file. From the Inset tab, link panel, click on the DWF markup button (Figure 6). This will open the Import/Link DWF file dialog. Navigate to the location of your DWF file and then select Open.

Figure 6 - DWF Markup button

The Link Markup Page to Revit Sheets dialog (Figure 7) will then open. On the left side (DWF View) of the dialog will be a listing of those sheets that have markups from Design Review. It will only list the sheets that have markups, sheets with no markups are not listed. The right side (Revit View) of the dialog will display the Revit sheet that corresponds to the DWF view.

You want to make sure that you review this dialog very carefully. If you have renumbered, added or deleted sheets since the DWF file was created, it is possible that Revit could list the wrong Revit View for a DWF View. I have not had this occur, but something to keep in mind.

Also be aware that if you select a sheet on the DWF View side and then click OK to the Link Markup Page to Revit Sheets dialog, Revit will only link that single selected DWF View.

If your view(s) correspond correctly, you can click OK to start the DWF linking process.

Figure 7 - Link Markup Page to Revit Sheets dialog

Once your DWF file(s) have been linked into Revit, we need to find which sheets have them. Revit currently doesn’t allow us to generate a schedule to easily locate and track them, so we have to do a little digging if you don’t want to open the Design Review file.

The easiest method to find your markups is to open Manage Links (Insert tab, Link Panel) as shown in Figure 8 and make the DWF Markups tab active.

Figure 8 - Linked DWF files

Select anyone of the linked files. Then at the bottom of the dialog, click on the Located In… button. This will open the Link Markup Page to Revit Sheet dialog (Figure 7) and you can use that to make note of what Revit sheets have markups. In this example, the project file I am using only have 5 sheets so tracking done the markups is not that difficult. However on a real projects, you definitely do not want to go sheet-by-sheet looking for redlines.

We can now navigate to one of our markups in Revit. Figure 9 shows an example of a markup. When you select a markup the Properties palette will provide you with some basic information about the markup as well as giving you the options to change the status of the markup. In the example shown in Figure 9, I clicked on the History button in the Properties palette and is gives me basic information about the history of that particular redline.

Figure 9 - DWF markup in Revit

If I click on the Notes button in the Properties palette, the Edit Text dialog will open (Figure 10). This allows you to add notes, comments or questions that you might have regarding a particular markup. Figure 11 shows how that Note appears in Design Review.

Figure 10 - Associating a Note with a Markup

Figure 11 – Note from Revit

When you save your Revit project file, any changes to the status of the DWF is automatically saved to the DWF file.

The great thing about using DWF files for processing markups is that they are easily tracked and they markups are an overlay to the Revit sheets. If you can get over the hump of marking up digitally, then using DWF files can make your life easier.

Revit OpEd: Five Minutes Working with Rotated Views

Revit OpEd: Five Minutes Working with Rotated Views: A common question from people with experience using AutoCAD is, "Does Revit have a UCS too?". There isn't a literal equal tool...