Register Today - Spring 2015 BIMForum - Transforming Deliverables

REGISTER TODAY! TRANSFORMING DELIVERABLES The "deliverable" is a mechanism used to relay instructions and information from one party to another in a useful format. A common opinion is that the "I" in BIM is of utmost importance, but it is also the most overlooked. How can our industry better harness the information we are creating with BIM tools? What forms should these new deliverables take? Do traditional formats still work? Are there 'new and improved' deliverables on the horizon? Presentations will address the following topics: - Using BIM, but still improving traditional deliverables - Creation of innovative model-based deliverables - Managing the risk of model sharing - Do better deliverables yield better results in the field? - Are owner requirements evolving to allow new deliverables? - Can BIM deliverables improve AHJ reviews? CALL FOR PRESENTATIONS STILL OPEN click here to submit  Submission Deadline January 15, 2015 Registration Fee: Before March 18, 2015 $545.00 After March 18, 2015 $650.00 Want to bring your whole team? Email duntonr@agc.org about group registration discounts! Interested in Exhibiting or Sponsorship? Click Here

Autodesk BIM 360 Glue Desktop Client

The following URL will allow you to reinstall the Autodesk BIM 360 Glue desktop client.

https://b4.autodesk.com/desktop/

Revit OpEd: Review Warnings Show and Worksets

Revit OpEd: Review Warnings Show and Worksets: We can choose which worksets are open (visible). When we choose to take advantage of that it affects what we see in views naturally. When we...

Repost: BIM & BEAM: Direct Analysis Method Whitepaper

Repost: BIM & BEAM: Direct Analysis Method Whitepaper

July 01, 2014

Direct Analysis Method Whitepaper

I am happy to share with you next whitepaper: Direct Analysis Method
Designing for stability is a critical requirement for all steel structures, but implementing the latest stability analysis methods into engineering workflows can be challenging and have significant negative effects if done improperly.  With the release of the AISC Specification for Structural Steel Buildings (AISC 360-05) in 2005, AISC introduced the Direct Analysis Method and imposed new requirements for stability analysis and design. These changes represent a fundamental shift in how engineers consider destabilizing effects, shifting the accounting of these effects from member capacity calculations to member demand (analysis) calculations. Utilizing the Direct Analysis Method results in greater accuracy, simplified member capacity calculations, and greater applicability to more types of structures.

Read more.

Revit Warnings: Structural usage set to Non-bearing

A structural framing element is attached to a wall whose Structural Usage is set to Non-bearing.

This means that you have used a structural element such as a beam and it is attaching to a wall whose structural usage is set to Non-bearing. The following table lists the automatic Structural Usage settings for beams, based upon the elements in which they are being connected. There are a couple of different methods to correct this problem, each with pros and cons. The method used would be dictated by a number of factors, including determining if the structural elements(s) are truly structural elements or some type of faux treatment.

#1: Change the Structural Usage of the Wall from Non-bearing to Bearing by selecting the wall and bringing up the Element Properties dialog and changing the Structural Usage to Non-bearing. One of the downsides to this is if you are working with a structural engineer that using Revit Structure this wall will appear as a Bearing wall. If you are working with a structural engineer using Revit Structure, this would NOT be the appropriate method.

If the elements that have been modeled are not being used as structural elements, but being used as some sort of faux treatment, then consideration should be given to remodeling the framing using a non-structural elements.

Weight

If you are working in Revit and ever run across this "Weight" warning, do not fear, Revit is not making any comments about your actual weight.

It's the first time I have run into this warning myself. After doing some research and reviewing the journal file, the problem appears to be a connectivity issue. The warning seems occurs when you have a file not saved issue. If this is the case, rather than trying to Save to Central, trying saving just to your local first and then Save to Central.

In the case that this actual warning occurred, the user has just loaded in a couple image files and was trying to STC from a remote connection.

Autodesk Revit Model Review

I have been working on a number of different projects with a wide array of client standards. Making sure that models are complaint with those standards can be difficult. Fortunately, Revit has something called Autodesk Revit Model Review. It's a tool that is available as part of your subscription package that, in short allows you to run checks against your model files. Some examples of the checks you can preform are:

• Model Naming
• Report Walls are unconnected to a level
• Number of Filled Regions
• Text heights that are different from approved heights

Autodesk Revit Model Review has been around for awhile and I believe that it was originally developed by IMAGINiT and I think it is one of the most under utilized tools.

I have been spending a lot of time developing new checks for Model Review, so I thought I would share some of those. The first check I thought I would share is finding the number of In-Place families in a project.

Begin by opening up the Revit Model Review Manage dialog to start developing or editing existing check files. From the Check pull-down menu, click on Add to add a new check. Then click on Standards followed by Number of Elements to create a check that will find elements we are search for.

The first thing we need to do is edit the Basic information about the check. In this example, I provided a more descriptive name for the check, provided some general notes about the check and under status I checked the "Report Only" checkbox.

The status section shouldn't be overlooked. There are three options:

• Enabled: When this option is NOT checked, the rule is disabled, meaning it will not be used.
• Report Only: The majority of checks have a pass or fail set of conditions. In this particular case, I just want to report the number of in-place families in the project. This example, does not have a set of conditions to either pass or fail.
• Allow Correction: Some checks provide for an option that attempt to correct the model. When this option is enabled a "wrench" icon in the fix column in the Check Results Browser as shown below. Clicking on the wrench button will attempt to correct the issue. I personally do not use this option, as I am not sure how the tool will correct the issue. If the check you are creating does not allow for auto correction, then the option will be grayed out.

 

 

The next step is to switch to the Filter tab. This is where we will define which families are going to be tested. In the Family Category dropdown, select Is In Place.

When you select Is In Place, TRUE will automatically be selected. You then click on the Add button to create the filter.

The last step is to switch to the Pass Message tab. In this section you can customize the message

The most important step is to save the file and make it available to Check routine. At the top of the dialog, click the Profile button and then Edit. You will then be able to add the check file you just checked to the list of available checks.

When you run the actual check, you will get results similar to below if you have in-place families in your project.
 

Autodesk Revit Model Review - Admin Access Requirement

If you have tried using Autodesk Revit Model Review to either edit and existing checkset or create a new one and you are not a system administrator, you might have run into two known issues. Autodesk Model Review is installed in the \Program Files (x86)\ folder and that requires admin access to edit (thanks for pointing that out Daniel - I should look at the Help file more often). Another issue with the installation is the default output folder (location where checks results will be saved to) is set during installation to the installing user’s documents folder, which as only admins can install, is a folder which the normal users don’t have access rights (thanks Brendon).

If you are not an Admin, you can still create and edit checksets. You just can't save then to the default folder. If you want to run those against models though, we have to alter the ModelReview.config file and that is going to require Admin access.

To change the location of the output file and add a new checkset, open the Model Review config file located:

C:\Program Files (x86)\Autodesk\Autodesk Revit Model Review 2014\ModelReview.config

Edit this file as follows:

•  Line 9: Copy line 8 to add the information for your new check. I recommend location the check file (.bfc) on a sever or other location that you have read/write access. This will permit you to edit the check file as needed., then copy the physical file to this folder
• Line 11: Edit the <OutputPath> entry to a location accessible to normal users.

You can then save the ModelReview.config file to a location that you have read/write access. You will then need to find someone in your organization with Admin access that can replace the original Modelreview.config with the file you just created.

Autodesk Project Skyscarper

from In the Fold

Project Skyscraper to bring Revit Collaboration to the Cloud  

Project Skyscraper is a technology preview for Revit that will allow architects, engineers and contractors to collaborate on the Autodesk 360 cloud platform, eliminating the need for firms to invest in costly IT set-ups.

With collaborative workflows across teams spanning different firms and locations becoming more and more common, architecture, engineering and construction firms are looking for ways to simultaneously co-author models across firewalls. Project Skyscraper allows project stakeholders from multiple companies or locations to concurrently author a model using the BIM process.  Extended teams can view, search and provide feedback on project models on any device. No more emails with attached PDFs.

Project Skyscraper enables team members in different firms and sites to work on the same project models simultaneously.

Several customers are already testing Project Skyscraper in a production beta environment, and we currently expect the full commercial release of the software by the end of this year.

 “Our customers have told us that technology can actually get in the way of their collaborative workflows.  They end up exchanging data inefficiently, with email as a lowest common denominator for communication among the team.  We built Project Skyscraper and integrated it with Autodesk 360 to break down those barriers and let the team focus on delivering high quality buildings on time and on budget,” said Kyle Bernhardt, Cloud Services Product Line Manager, Autodesk.  “Our production beta customers are already reaping those benefits, and we look forward to delivering an entirely new form of collaboration to our AEC customers.”

Autodesk will host several Project Skyscraper “Open House” sessions later this summer to allow more customers to test this new collaboration system. Customers interested in participating can go here to learn more.

Project Skyscraper runs on the Autodesk 360 platform, providing users with access to additional cloud services such as simulation and rendering.

- See more at: http://inthefold.autodesk.com/in_the_fold/2014/06/autodesk-at-aia-2014-project-skyscraper-dynamo-advance-the-future-of-bim-for-architects.html#sthash.ZQ16C3tJ.dpuf

What's New in Clarity for Revit Server 2015

Some of you might have already noticed that Clarity 2015 for Revit Server has been installed. ​

What's New in the 2015 Release

The 2015 version is targeted for firms looking to improve efficiency, provide easier model exchanges with partners, and improved usability with additional fit and finish features based on your input/feedback.

Some notable features in this release include:

·         Integration with Autodesk BIM 360 Glue

·         New User Interface With Improved Usability

·         Added Support for Model Exchange Workflows (Publish and Update Models)

·         New Tasks and Introducing Task Actions, Provide More Time Savings and Control Options

Detailed List:

·               Updated Look (Clean, Fast, Visual)

·               Support for Revit and Revit Server 2013, 2014 & 2015

·               Addition of Feedback Option

·               Addition of New “Project Cards” View for Projects

·               Project: Combined former “More” tab of files to Project Home

·               New Task Addition: Actions > Post Action

o        Run Script File

o        Move/Copy Files

o        Post to FTP

·               Task Addition: Custom IFC Exporter

·               Task Addition: Publish Model

·               Task Addition: Update Model (from Disk or FTP)

·               Task Addition: Target Filter Controls

·               Task Addition: View/Sheet Set Display Available

·               Task Addition: Publish to Autodesk BIM 360 Glue

·               Task Adjustment: DB Export Support for New Revision to Sheet

·               Task Adjustment: Error On Missing Links (Yes/No)

·               Task Server: Now Shows Version of Revit it Supports

·               Task Server: All Tasks Performable on Remote Servers

·               Task Server: Now Supports Multiple Central Hosts

·               Task Server: Remote Ping-based Claiming (Reduce Model Pull Time)

·               Task Server: Project Setting for Preferred Task Servers

·               Users: New Filter To Find Users (Global)

·               Users: Sortable Grid

·               Users: Addition of Disabled Users to Grid Sorting

·               Users: Support for Setting Users Expiration on Creation

·               Users: Coordinator Can Now Manage Artifact Files

·               Reports: Custom Sorting/Filtering Now Maintained on Export

·               Reports: Sorting Move Up/Down Selected Columns on Create/Edit

·               Revit Add-In: Launch Project Tasks Inside of Revit

·               Revit Add-In: Un-Set Accelerator (Revit Server Tool)

·               Revit Add-In: Option to send in the journal file right now.

·               Data Sheets: Backup Sheet on Delete

·               Data Sheets: Now Supports Side-by-Side Item Tables

·               Data Sheets: Family Images Now Included

·               Web Editing: Copy Data to Different Type

·               Web Editing: Image Selection “Detail View’ Option

For those of you that are responsible for updating team member models on Revit Server, one features that you will be interested in is the “Update Revit File From Disk” task. This task allows replace the file on Revit Server with a newer version of the same file with a Clarity Task. The old process required you to:

• ·         Download models
• ·         Log into Clarity
• ·         Open the project
• ·         Backup the Project
• ·         Edit the Project
• ·         Delete a file
• ·         Close Clarity
• ·         Open Revit
• ·         Save file to Revit Server

The new process is very simple:

• ·         Download model
• ·         Log into Clarity
• ·         Open the Project
• ·         Run the Task to Update Revit File From Disk

The Task functionality also provides the ability to automatically re-path links and strip views and sheets from the model as well.

Revit 2015 - Update Release 3

​Update Release 3 for Revit 2015 has been released

Revit 2015
Revit Architecture 2015
Revit MEP 2015
Revit Structure 2015